Auzz Trinklets N Crafts: Embosssing

Showing posts with label Embosssing. Show all posts

Wednesday, March 15, 2017

DT Teresa - Shades of Green

Hello Everyone!

Today I am sharing a card to suit our theme for March, Shades of Green.

This card uses Neenah Classic Crest 110lb Smooth Solar White Cardstock for the base which is cut with a paper trimmer at 4 ¼" x 11" and scored with a teflon bone folder at 5 ½" to make a top folding card of 5 ½" x 4 ¼".

I began by 'smooshing' four Distress Ink Pads (Cracked Pistachio, Lucky Clover, Twisted Citron, Mowed Lawn) onto a Ken Oliver Best Ever Craft Mat side by side and squirted the ink with a little water from a Tim Holtz Distress Sprayer Bottle a few times. I took a piece of Tim Holtz Watercolor Cardstock cut at 5 ½" x 4 ¼" and tapped it into the ink, allowing the ink to spread over the paper. When it was entirely covered, I set it aside to air dry. I quickly cleaned the ink from the mat easily with a cloth - paper towel would also work well.

I opted to create a whale (a long time favourite beastie) for my focal point as the background was reminiscent of a sea spray - albeit green - so I chose the Lawn Fawn Narwhal and Friends die set for this card. I used Bazzill coloured cardstock from my stash to create this happy fellow with his spout. Such a cutie isn't he?!

I used a die from My Favorite Things Blueprints 27 and cut a bright green piece of Bazzill cardstock from my stash with my Sizzix Bigshot Machine. I stamped the sentiment from My Favorite Things Twice the Wishes in Versamark ink onto this piece after using anti-static powder to prevent stray embossing powder from adhering in unwanted places, using my MISTI stamping tool. I then poured Ranger Liquid Platinum Embossing Powder onto the stamped sentiment and heated it with a Wagner heat tool.

Once the watercolour piece was dry, I used the Sizzix Bigshot Machine and diecut the cardstock with the My Favorite Things Peek-a-Boo Polka Dots background die. I attempted to leave as many dots in place as possible to keep them in order as I wanted to place them onto the card base as they appeared on the previously uncut piece. I placed foam dots onto each and every dot that stayed in place and removed the backing paper from the foam dots before lining up the watercolor piece with the card base and adhering the dots in place. I left the piece holding the dots in place and proceeded to place foam dots onto the 'escapee' dots and then puzzle pieced them into their respective holes. Once they were all laid onto the card base, I removed the negative piece. I plan to use this on a future card.

I doubled the height of the sentiment and whale diecuts using two layers of foam dots and adhered them in place and the card was complete.

Thankyou for following along with me today. Please feel free to ask questions if anything needs clarifying. If you cannot find the items I have used (listed below) in the Auzz Trinklets and Crafts store, be sure to drop Neha a message via email or Facebook and she will do what she can to order the product in for you.

Happy crafting and have a great day!

Teresa

Products used:

Neenah Classic Crest 110lb Smooth Solar White Cardstock

Paper Trimmer

Teflon Bone Folder

Cracked Pistachio Distress Ink Pad

Lucky Clover Distress Ink Pad

Twisted Citron Distress Ink Pad

Mowed Lawn Distress Ink Pad

Ken Oliver Best Ever Craft Mat

Tim Holtz Distress Sprayer Bottle

Tim Holtz Watercolor Cardstock

Lawn Fawn Narwhal and Friends

Bazzill coloured cardstock

My Favorite Things Blueprints 27

Sizzix Bigshot Machine

My Favorite Things Twice the Wishes

Anti-static powder

Versamark ink

MISTI stamping tool

Ranger Liquid Platinum Embossing Powder

Wagner heat tool

My Favorite Things Peek-a-Boo Polka Dots Dienamics

Foam dots

Wednesday, February 15, 2017

DT Teresa - Romance 2

Hello! I hope you all enjoyed your Valentine's Day yesterday, whether or not you celebrated the day designated for love!

Today I am sharing a card that fits the bill for Romance, our theme for February here on the Auzz Trinklets and Crafts blog.

This card uses Neenah Classic Crest 110lb Smooth Solar White Cardstock for the base which is cut with a paper trimmer at 4 ¼“ x 11” and scored with a teflon bone folder at 5 ½“ to make a top folding card of 5 ½“ x 4 ¼”.

I chose My Favorite Things Cookie Crumbs and the coordinating My Favorite Things Dienamics set You're the Milk to my Cookie for this project.

I used the sprinkles/hundreds and thousands stamp meant for a cookie and stamped it multiple times onto the card base with Altenew Crisp Dye Ink in Frosty Pink.

The layered frames were die cut from Neenah Classic Crest 80lb Smooth Solar White Cardstock with Simon Says Stamp Stitched Rectangles dies. I lined up the outside die with the third largest die to create the first frame and then used the outside die with the second largest die to create the top frame and adhered them together using 3M Scotch Double Sided Foam Tape and stuck these to the card base with double sided tape.

I cut four milk bottles from Neenah Classic Crest 80lb Smooth Solar White Cardstock and glued them together to create a dimensional piece and did the same with kraft cardstock to create the cookie, using the larger of the two circular dies in the set.

My Heidi Swapp Minc machine then came into action. I foiled Heidi Swapp Minc Sheets using Heidi Swapp Reactive Foil in Light Pink, iCraft Deco Foil in Red and iCraft Deco Foil in Gold. I then used dies from the MFT set to diecut the pieces I needed from the different colours of foil using my Sizzix Big Shot machine. The heart dies came from the Sizzix dies set that coordinate with Tim Holtz's Stampers Anonymous Crazy Things stamp set. The foiled pieces left over, I put away for future projects. I used a shim when cutting the lid for the bottle so the debossing was a little deeper and more obvious.

I took the label for the milk bottle and heat embossed the word milk from the MFT stamp set using Versamark ink, Hero Arts white embossing powder and Wagner heat tool. Prior to stamping, I used an EK Success Powder Tool on the foil to prevent stray embossing powder from sticking in places I did not want it, then wiped away the powder once the embossing had cooled with a microfibre cloth. I was not sure how the foil would react to the great heat of the tool, but was happy to see that it provided an interesting effect and a wonderful texture. I think I will be using this technique again as it would be perfect for a vintage look.

I glued all the pieces together and placed them onto the card base using Ranger Multi Medium Matte before stamping and heat embossing the sentiment from the MFT stamp set with Hero Arts white embossing powder onto a strip of black cardstock which I adhered with 3M Scotch Double Sided Foam Tape. Again, I used the EK Success Powder Tool prior to stamping on the black cardstock, wiping the powder away with a microfibre cloth after the embossing was done.

I showed this to my husband once I had finished and he asked if he could write in it and give it to me. Ha!